Audi A4, S4

since 2000 release

Repair and operation of the car


Audi A4, S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures when carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and installation of an ashtray
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and installation of a cover on a control panel
      Removal and installation of a pocket from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are permanent And
      Removal and installation of the top facing of a rack In
      Removal and installation of the lower facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Station wagon)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment





Removal and installation of an internal mirror

Removal

 PERFORMANCE ORDER

  1. Automatically darkened mirror: Disconnect a cover (3), take out the plug from the holder and disunite it.

Do not turn a cable channel (2).

  1. Turn a mirror (1) on a corner from 60 to 90 ° counterclockwise (arrow B) so that the lock spring was released.
  1. Remove a mirror (arrow A) back.

Installation

 PERFORMANCE ORDER

  1. Establish a mirror, having turned it on a corner from 60 to 90 ° and then turn it clockwise so that the lock spring was recorded.
  2. Automatically darkened mirror: Join the socket and fix it in the holder. Establish into place a cover (3).
  3. Automatically darkened mirror: Check work of a mirror. For this purpose include ignition, cover a photosensor from the forward party of a mirror and light a photosensor from a reverse side of a mirror with a pocket small lamp. The mirror has to be darkened within a short period of time.