Audi A4, S4

since 2000 release

Repair and operation of the car



Audi A4, S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures when carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and installation of an ashtray
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and installation of a cover on a control panel
      Removal and installation of a pocket from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are permanent And
      Removal and installation of the top facing of a rack In
      Removal and installation of the lower facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Station wagon)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment






Removal and installation of an ashtray

Forward ashtray

Removal

 PERFORMANCE ORDER

  1. Uncover the lever of switching of transfers/selector, address to appropriate section.
  1. Turn out 2 screws (2) and take out an ashtray (1) of the central console.
  1. Disconnect a cover of an ashtray (3).
  1. Remove a slip (4) from the central console.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in sequence, the return to removal.

Back ashtray

Removal

 PERFORMANCE ORDER

  1. Open an ashtray (1) and take out it from the central console. (2) – lens of a lamp of illumination of an ashtray. (3) – control panel back seat.
  1. Disunite the socket of illumination of an ashtray.
  1. Heating of a back seat: Wring out outside lock levels (an arrow A on an accompanying illustration) at the left and on the right and disconnect the control panel from the holder. Incline the panel (arrow B) back and disconnect from below.
  1. Heating of a back seat: Disunite sockets of switches (1) and (2) and take out the panel from the central console.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in sequence, the return to removal.











http://b3-b4.ru/