Removal and installation of a loker of a back wing Removal
Lifting operation and installations of the car on supports is connected with danger! Therefore before carrying out operation study Poddomkrachivaniye's Section and towage.
|
- Mark on tires with shooters the direction of their rotation. Weaken bolts of fastening of a wheel. Lift and establish forward part of the car on supports and remove wheels.
|
- Right side of the car: Turn out bolts (3).
|
|
- Turn out bolts (2), disconnect a loker (1) and take out him from a wing down. (4) – razzhimny nut.
|
|
Installation
|
- Installation is carried out in sequence, the return to removal.
- Fix a wheel, observing the direction of its rotation. Lower the car on wheels and only after that tighten cross-wise bolts of fastening of a wheel the moment 120nm.
|
|
|