Audi A4, S4

since 2000 release

Repair and operation of the car



Audi A4, S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures when carrying out body works
   Cleaning and leaving
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   + External equipment
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of the parking brake
      Removal and installation of a cover of the lever of switching of transfers/selector
      Removal and installation of an ashtray
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and installation of a cover on a control panel
      Removal and installation of a pocket from the driver
      Removal and installation of a ware box
      Removal and installation of an antisolar peak
      Removal and installation of facing are permanent And
      Removal and installation of the top facing of a rack In
      Removal and installation of the lower facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Station wagon)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment






Removal and installation of facing of the lever of the parking brake

Removal

 PERFORMANCE ORDER

  1. Lift the lever of the parking brake.
  1. First option of execution: Take out a safety pin (2) (an arrow A on an accompanying illustration) and remove facing of the handle (1) in the direction of an arrow (In).
  1. Second option of execution: Press a screw-driver a spring down and disconnect from a hook. At the same time strongly pull and remove facing of the handle (1) in the direction of an arrow (In).
  1. Remove facing of the handle of a brake (1).
  1. Lift the handle of the parking brake up, turn out 2 screws (3) and remove the holder (2).

Installation

 PERFORMANCE ORDER

  1. Put on facing the handle of the parking brake and press a lock pin into facing.
  2. Lift upward the lever of the parking brake, put on the lever the holder and screw 2 screws.
  3. Completely release the lever of the parking brake.
  4. Tighten screws the moment 4nm and insert facing (1) behind into an aperture (4).
  5. Press facing of the lever.