Check of a state, adjustment and replacement of brushes of screen wipers
Address also to the Section Replacement of Elastic Bands of Brushes of a Screen Wiper. On brushes of screen wipers the road film collects over time, reducing efficiency of their work therefore brushes should be washed out regularly in the soft cleaning solution. Check of a condition of brushes of a screen wiper
Assemblies of screen wipers with brushes have to look round regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace brushes. If at survey it is not revealed anything unusual, wet a windshield, include screen wipers, let's them work a little, and switch off them. An uneven trace from brushes on glass or strips on pure glass specify that brushes should be replaced. If brushes insufficiently well clear a windshield, the following reasons of it are possible. When passing by the car of an automatic sink on a windshield wax particles got. These particles can be removed at addition in liquid of windscreen washer of the detergent possessing property to dissolve wax. Filling of the tank of liquid for purification of glasses with voskorastvoryayushchy properties can significantly improve action of screen wipers. Fat-dissolving cleaners are not able to clear glass completely. Damage of brushes can be also the cause of bad purification of glasses, brushes should be replaced. During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and necessarily to tighten every time when checking brushes (apply to the Head Kuzov for more detailed information on operation of the mechanism of screen wipers). |