Audi A4, S4

since 2000 release

Repair and operation of the car



Audi A4, S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
- Suspension bracket and steering
   Security measures at work
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   + Corners of installation of wheels of the car
   - Steering and safety cushions
      General information and security measures
      Removal and installation of the block of a safety cushion
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of a protective cover of the steering mechanism
+ Body
+ Onboard electric equipment






Removal and installation of a steering wheel

Removal

 PERFORMANCE ORDER

  1. Establish wheels directly.
  2. Remove the safety cushion block, address to the Section Removal and installation of the block of a safety cushion.
  3. Turn out the screw with an internal polyhedron.

Installation

 PERFORMANCE ORDER

  1. Check, whether directly there are wheels.
  2. Put to the place of steering a wheel and fix it the screw the moment 50nm.
  3. Install the safety cushion block, address to the Section Removal and installation of the block of a safety cushion.