Audi A4, S4

since 2000 release

Repair and operation of the car



Audi A4, S4
+ Introduction
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
- Suspension bracket and steering
   Security measures at work
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Corners of installation of wheels of the car
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
   + Steering and safety cushions
+ Body
+ Onboard electric equipment






Conditions of check of corners of installation of wheels

Check of corners of installation of the car demands existence of a viewing hole or the special measuring elevator. When carrying out measurement it is necessary to satisfy the following conditions:

  • Air pressure in tires corresponds to the set.
  • Forward wheels are put directly.
  • The car is not loaded, the fuel tank is completely filled.
  • Suspension brackets of the car were with an osazhena force.
  • The steering is adjusted.
  • Side plays in connections of steering drafts lie within the admissible.
  • Side plays in connections of a suspension bracket lie within the admissible.
  • Depth of drawing of a protector of tires of one axis is identical.